Guide Base 969-95-28530 For Komatsu 60KW Plasma Cutting Machine, Komatsu Parts
Shanghai ZhouBo Welding & Cutting Technology is specialized in Welding & Cutting consumables with Good Quality, Competitive Price, On-Time Delivery and Excellent Services and we are looking for long-term friendly cooperation with you. Komatsu plasma Cutting machine 30KW, 60KW accessories, plasma consumables. Komatsu plasma 3082, 3084, 3086 plasma cutting accessories, Komatsu plasma torch parts. Komatsu plasma cutter nozzle 969-95-24130 1.3mm, plasma cutting nozzle 969-95-24180 1.1mm, nozzle 969-95-24190 0.8mm, nozzle 969-95-24770 0.6mm, nozzle 969-95-24930 1.4mm, nozzle 969-95-24920 1.6mm, Koike electrode 969-95-24310, electrode 969-95-24910, Shield 969-95-24340, Shield 969-95-24750, Shield 969-95-24810, Shield 969-95-24950, Shield 969-95-24960
Customer Satisfaction
If you worry about our products’ quality, I can give you some samples to test by free. Please don't hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Shipping and handing
1. DHL is our preferred shipping method. Meanwhile TNT, EMS, Fedex, UPS are available.
2. Make sure to leave telephone number when filling your buyer information.
3.You can check the goods where it is in transit through tracking NO .
Refund(Echange Only)
1.If you are not satisfied with your purchase, you can echange the items received. you must contact us within 5 days of the receipt
of your order. And you should pay all additional shipping fees incurred and the items returned should be kept in their original
status.
2.If you wish to echange defective or incorrect shipped goods, please contact us within 5 days after receiving the goods.
Notes
1. The buyer are responsible for any insurance you think necessary.
2. The processing time for a specific order varies with the product type and stock status. Mostly, processing time can be 3 to 15 working days.
Feedback
1.Since your feedback is very important to our business's development, we sincerely invite you to leave positive feedback for us if
you are satisfied with our product and service. It'll just take you 1 minute.
2.Please contact us before leaving any negative or neutral feedback. We will work with you to solve any problems.Thank you!
Machine | HEC NO. | Ref NO. | Description |
30KW | L41470 | 969-95-24470 | Outer Cap |
L21750 | 969-95-24750 | Shield Cap (<t6mm) | |
L21810 | 969-95-24810 | Shield Cap (>t6mm) | |
L31141 | 969-95-24141 | Ring | |
L11130 | 969-95-24130 | Nozzle 1.3mm | |
L11190 | 969-95-24180 | Nozzle 1.1mm | |
L11180 | 969-95-24190 | Nozzle 0.8mm | |
L11770 | 969-95-24770 | Nozzle 0.6mm | |
L71320 | 969-95-24320 | Guide A (Nozzle 1,3,1,1mm) | |
L71780 | 969-95-24780 | Guide B (Nozzle 0.8,0.6mm) | |
L01310 | 969-95-24310 | Electrode | |
L91410 | 969-95-24410 | Shim for Outer cap | |
L91162 | 969-94-24162 | Center pipe | |
L91163 | 969-94-24163 | Center pipe | |
L81311 | 969-94-24311 | Torch Body Kit | |
L81312 | 969-94-24312 | Torch Body Kit | |
L90990 | 969-95-10990 | Cooling water | |
L01910 | 969-95-24910 | Electrode | |
L11920 | 969-95-24920 | Nozzle 1.6 | |
L11930 | 969-95-24930 | Nozzle 1.4 | |
L21950 | 969-95-24950 | Shield Cap 1.6 | |
L21960 | 969-95-24960 | Shield Cap 1.4 | |
Technical Support:
Common problems in the application of plasma cutting machine
1 poor contact with the ground
"The ground is essential preparation before cutting work a. Without the use of special grounding tool, workpiece surface insulation and long-term aging serious ground, will cause poor contact with the ground.
Should use special grounding tool, and check whether the insulation effect of the ground contact with the workpiece surface, avoid the aging ground.
2 spark generator can't be broken arc
Plasma cutting machine, first of all to ignite the plasma arc, by the high frequency oscillator excited gas between the electrode and the inner wall of the nozzle, resulting in high-frequency discharge, the gas ionization and the formation of local small arc, the small arc by compressed air, ejected from the nozzle to ignite plasma arc. This is main task spark generator. Under normal circumstances, the spark generator working time is 0.5 ~ 1s, the reason does not automatically break arc is generally offset control circuit board components, discharge electrode gap of the spark generator is not right.
Should always check the spark generator discharge electrode, make the surface smooth, timely adjustment of the discharge electrode gap spark generator (0.8 ~ 1.2mm), it is necessary to change control board.
3 other
"In addition to the above reasons, the cutting speed is too slow, cutting the verticality of the torch and workpiece, and the operator of the plasma cutting machine familiarity, the operation level and influence the stability of the plasma arc, the user should notice in these aspects.