Plasma Cutting Shield 969-95-24340 For Komatsu Plasma Cutter Machine Consumables
Komatsu plasma Cutting machine 30KW, 60KW accessories, plasma consumables. Komatsu plasma 3082, 3084, 3086 plasma cutting accessories, Komatsu plasma torch parts. Komatsu plasma cutter nozzle 969-95-24130 1.3mm, plasma cutting nozzle 969-95-24180 1.1mm, nozzle 969-95-24190 0.8mm, nozzle 969-95-24770 0.6mm, nozzle 969-95-24930 1.4mm, nozzle 969-95-24920 1.6mm, Koike electrode 969-95-24310, electrode 969-95-24910, Shield 969-95-24340, Shield 969-95-24750, Shield 969-95-24810, Shield 969-95-24950, Shield 969-95-24960
Koike plasma Cutting machine super 400 accessories, plasma consumables. Koike plasma super 400 plasma cutting accessories, Koike super 400 plasma torch parts. Koike plasma cutter nozzle PK030068 2.3L, plasma cutting nozzle PK030067 2.3R, nozzle PK030062 2.5L, nozzle PK030060 2.5R, nozzle PK030063 3.0R, nozzle PK030061 3.0L, Koike electrode PK031027 A type, electrode PK40008459 P type, Koike super 400 swirl ring R PK031204, swirl ring PK031205 L, Shield PK031332, plasma cutter water tube PK405152. plasma retaining cap PK031336,
| Machine | HEC NO. | Ref NO. | Description |
| 30KW | L41470 | 969-95-24470 | Outer Cap |
| L21750 | 969-95-24750 | Shield Cap (<t6mm) | |
| L21810 | 969-95-24810 | Shield Cap (>t6mm) | |
| L31141 | 969-95-24141 | Ring | |
| L11130 | 969-95-24130 | Nozzle 1.3mm | |
| L11190 | 969-95-24180 | Nozzle 1.1mm | |
| L11180 | 969-95-24190 | Nozzle 0.8mm | |
| L11770 | 969-95-24770 | Nozzle 0.6mm | |
| L71320 | 969-95-24320 | Guide A (Nozzle 1,3,1,1mm) | |
| L71780 | 969-95-24780 | Guide B (Nozzle 0.8,0.6mm) | |
| L01310 | 969-95-24310 | Electrode | |
| L91410 | 969-95-24410 | Shim for Outer cap | |
| L91162 | 969-94-24162 | Center pipe | |
| L91163 | 969-94-24163 | Center pipe | |
| L81311 | 969-94-24311 | Torch Body Kit | |
| L81312 | 969-94-24312 | Torch Body Kit | |
| L90990 | 969-95-10990 | Cooling water | |
| L01910 | 969-95-24910 | Electrode | |
| L11920 | 969-95-24920 | Nozzle 1.6 | |
| L11930 | 969-95-24930 | Nozzle 1.4 | |
| L21950 | 969-95-24950 | Shield Cap 1.6 | |
| L21960 | 969-95-24960 | Shield Cap 1.4 | |
Technical Support:
The maintenance of the plasma torch
1. the wearing parts should be replaced in time before the complete damage.
Vulnerable parts are not used completely damaged after the replacement of, because of serious damage to the electrode, the nozzle and the eddy current ring will can not control the plasma arc, cutting torch damage easily. So for the first time found that the quality of cutting down, it should be timely inspection and replacement of wearing parts.
2 the contact surface of the cleaning electrode and the nozzle
Must ensure that the nozzle and electrode contact surface clean and free of oil, if the contact surface with dirt, the torch will not be able to normal working, should use such as hydrogen peroxide cleaning agent cleaning.
3 check cutting gas and protective gas
Check the flow and pressure of cutting gas and protecting gas every day, if the flow is not sufficient or leakage, should immediately stop the trouble.
