Hypertehrm HPR130XD / HPR130 Electrode 220181 Plasma Cutter Tips And Electrodes
Shanghai ZhouBo Welding & Cutting Technology is specialized in Welding & Cutting consumables with Good Quality, Competitive Price, On-Time Delivery and Excellent Services and we are looking for long-term friendly cooperation with you. We are a professional manufacturer of plasma cutter consumables, Our company is located in the Shanghai City, China ,it was established in 2007,but we had 10 years manufacturing experience in this field, the new factory covers an area of more than 10000 square meters .There are 50-100 workers and 20 research engineers.
| Machine | HEC NO. | Ref NO. | Description |
|
|
H03192 | 220192 | Electrode,30Amp |
| H03552 | 220552 | Electrode,50Amp | |
| H03187 | 220187 | Electrode,80Amp | |
| H03181 | 220181 | Electrode,130Amp | |
| H03352 | 220352 | Electrode,200Amp | |
| H03435 | 220435 | Electrode,260Amp | |
| H03649 | 220649 | Electrode,130Amp Bevel | |
| H03541 | 220541 | Electrode,260Amp Bevel | |
| H03665 | 220665 | Electrode,130Amp(silver Plus) | |
| H03666 | 220666 | Electrode,200Amp(silver Plus) | |
| H03668 | 220668 | Electrode,260Amp(silver Plus) | |
| H03629 | 220629 | Electrode,400Amp | |
| H73180 | 220180 | Swirl Ring,30Amp | |
| H73553 | 220553 | Swirl Ring,50Amp | |
| H73353 | 220353 | Swirl Ring,200Amp | |
| H73179 | 220179 | Swirl Ring,80/130/260Amp(Bevel) | |
| H73436 | 220436 | Swirl Ring,260/260Amp(Bevel) | |
| H73631 | 220631 | Swirl Ring,400/400Amp(Bevel) | |
| H13193 | 220193 | Nozzle,30Amp | |
| H13554 | 220554 | Nozzle,50Amp | |
| H13188 | 220188 | Nozzle,80Amp | |
| H13182 | 220182 | Nozzle,130Amp | |
| H13354 | 220354 | Nozzle,200Amp | |
| H13439 | 220439 | Nozzle,260Amp | |
| H13646 | 220646 | Nozzle,130Amp(Bevel) | |
| H13542 | 220542 | Nozzle,260Amp(Bevel) | |
| H13632 | 220632 | Nozzle,400/400Amp(Bevel) | |
| H33754 | 220754 | Retaining Cap 30/50Amp | |
| H33176 | 220176 | Retaining Cap 80/130Amp | |
| H33355 | 220355 | Retaining Cap 200Amp | |
| H33433 | 220433 | Retaining Cap 260Amp | |
| H33603 | 220603 | Retaining Cap (Bevel) 130/260Amp | |
| H33756 | 220756 | Retaining Cap 80/130Amp | |
| H33757 | 220757 | Retaining Cap 200Amp | |
| H33760 | 220760 | Retaining Cap 260Amp | |
| H33635 | 220635 | Retaining Cap 400/400Amp(Bevel) | |
| H33740 | 220740 | Retaining Cap (Bevel) 130/260Amp | |
| H23194 | 220194 | Shield,30Amp | |
| H23555 | 220555 | Shield,50Amp | |
| H23189 | 220189 | Shield,80Amp | |
| H23183 | 220183 | Shield,130Amp | |
| H23356 | 220356 | Shield,200Amp | |
| H23440 | 220440 | Shield,260Amp | |
| H23645 | 220645 | Shield,130Amp(Bevel) | |
| H23545 | 220545 | Shield,260Amp(Bevel) | |
| H23761 | 220761 | Shield,200Amp | |
| H23764 | 220764 | Shield,260Amp | |
| H23636 | 220636 | Shield,400/400Amp(Bevel) | |
| H23742 | 220742 | Shield,130Amp(Bevel) | |
| H23741 | 220741 | Shield,260Amp(Bevel) | |
| H43173 | 220173 | Retaining Cap 30/50/80/130Amp | |
| H43398 | 220398 | Retaining Cap 200/260/(Bevel)130/260Amp | |
| H43747 | 220747 | Retaining Cap 30/50/80/130Amp | |
| H43637 | 220637 | Retaining Cap 200/260/400Amp(Bevel) | |
| H83818 | 128818 | HPR torch assembly | |
| H83162 | 220162 | Quick-disconnect torch | |
| H83163 | 220163 | Quick-disconnect recepticle | |
| H83706 | 220706 | Quick-disconnect torch | |
| H83705 | 220705 | Quick-disconnect recepticle | |
| H93571 | 220571 | Water Tube with O-Ring | |
| H93340 | 220340 | Water Tube with O-Ring(30/50/80/130/200/260Amp) | |
| H93700 | 220700 | Bevel water tube(mild steel-130A) |
Technical Support:
Method for prolonging service life of consumable parts
1, keep the plasma gas dry and clean
Plasma system need to dry and clean gas plasma in order to work properly, dirty gas is usually compressed gas system, it will relationship exertion of life, resulting in non normal damage. Method for testing the quality of gas cutting torch in the test state, put a mirror in the below, torch gas consumption, if there is a gas and mist on the mirror, you need to identify the cause and correct.
2, cutting should start from the edge
As far as possible from the edge of the cut, and do not cut after the first punch. The use of the edge as the starting point will extend the life of the consumption, the right side
The method is that the nozzle is directly aligned with the edge of the workpiece and then starts the plasma arc.
3, to avoid the expansion of plasma arc
If the plasma is only extended to be exposed to the surface of the workpiece, this tension and expansion will occur at the beginning and end of the plasma arc, which will cause the nozzle to be damaged. If you use the right edge of the starting point, select the right "broken arc" signal time, this problem can be avoided.
4, to reduce unnecessary "starting arc (or arc)" time
When the arc starting nozzle and electrode consumption are very fast, before the start, should be put in the metal cutting torch within walking distance.
